genelop.blogg.se - october 2022

#Mac ftp upload on file change software#
#Mac ftp upload on file change password#

binary //Set the file transfer mode to binary.ġ50 Opening ASCII mode data connection for .įTP: 93832832 byte(s) received in 722 second(s) 560.70byte(s)/sec.

#Mac ftp upload on file change software#

# Download the latest version of the system software to the switch.

You can find the vrpcfg.zip file in D:\FTP on the PC.

# Upload the configuration file to the FTP server (PC).ġ50 Opening ASCII mode data connection for vrpcfg.zip.įTP: 8174 byte(s) sent in 0.099 second(s) 82.56Kbyte(s)/sec.

Run the put command to upload the required file to the FTP server (PC) or run the get command to download the required file from the FTP server to the switch.

#Mac ftp upload on file change password#

User(192.168.0.2:(none)):user //Enter the FTP user name user.Įnter password: //Enter the FTP password huawei. Log in to the server (PC) from the switch using FTP.For an indirectly connected network, ensure that there are reachable routes between the FTP server and client. The direct connection mode is used as an example here.

The preceding information indicates that the switch and FTP server can communicate properly with each other. PING 192.168.0.2: 56 data bytes, press CTRL_C to break Check whether the switch and FTP server are connected.If a fixed switch uses VLANIF 10 to connect to the FTP server through GE0/0/1, the configurations are as follows: system-view Connect the FTP server to Ethernet0/0/0 of the switch using a network cable.